verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X200SLB

The AirTAC SE50 Standard Cylinder SE50X200SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 200mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke200 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$89.55 $97.05Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X200SLB

The AirTAC SE50X200SLB is a double-acting single-rod ISO 15552 profile cylinder engineered for 982 N push and 825 N pull at 0.5 MPa. Driven by a 20 mm hard-chrome rod with an M16x1.5 end thread, it provides robust actuation for mid-range industrial loads. The integrated -S magnet enables direct position sensing using AirTAC CMSE reed or DMSE electronic switches.

Its square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in compact spaces. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, preventing hard impacts when cycling at speeds up to 800 mm/s. The LB foot mounting accessory provides a stable base for horizontal installations.

Airtac SE50 Standard Cylinder SE50X200SLB Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X200SLB
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke200 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X200SLB

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X200SLB Is Used

conveyor_belt

Pallet Diverter Gate

Uses the 982 N push force at 0.5 MPa to reliably swing heavy timber pallets onto secondary packaging lines without stalling.

package_2

Carton Flap Folder

Leverages the 200 mm stroke and DMSE electronic sensor feedback to time the precise folding of corrugated cardboard flaps prior to sealing.

precision_manufacturing

CNC Fixture Clamping

Secures aluminum castings during machining, relying on the LB foot mount to keep the 50 mm body rigid under high-vibration spindle loads.

Is the Airtac SE50 Standard Cylinder SE50X200SLB the Right Cylinder?

Selecting this 50 mm bore yields 982 N of push force at 0.5 MPa. If your payload is lighter, stepping down to the 40 mm bore drops the output to 628 N, whereas upgrading to the 63 mm bore increases it to 1559 N. Because this is a double-acting cylinder, it will drift if air pressure is lost or the valve centers; to hold a vertical load safely without live pressure, integrate an external rod lock like the BSE series or a pilot-operated check valve.

With a 200 mm stroke, the 20 mm rod and M16x1.5 thread provide substantial side-load resistance, but you should still use an external guide rail for heavy off-center loads to prevent rod-bearing wear. The PT1/4 port and LB foot mount make it dimensionally interchangeable with any standard ISO 15552 cylinder, ensuring a seamless retrofit using existing mounting hardware.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X200SLB FAQ

At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum rated push of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE50X200SLB is dimensionally interchangeable per ISO 15552. You can drop it into existing foot-mount setups using the LB accessory and standard hardware. The -S magnet also allows you to mount AirTAC CMSE or DMSE sensors directly into the extruded barrel grooves.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X200SLB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X200SLB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.