
The AirTAC SE50 Standard Cylinder SE50X210 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 210mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X210 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 982 N push force at 0.5 MPa. Its square extruded aluminum barrel completely eliminates external tie rods, yielding a highly compact body that resists corrosion and mounts flush against machine frames without protruding hardware.
This 50 mm bore unit travels a 210 mm stroke and relies on field-adjustable pneumatic cushioning at both ends to decelerate the piston smoothly, preventing hard end-stop impacts at operating speeds up to 800 mm/s. Note that this specific SKU lacks a built-in magnet, meaning it is not wired for CMSE or DMSE position sensing without modification.
| Model | Airtac SE50 Standard Cylinder SE50X210 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push at 0.5 MPa needed to reliably fold and seal heavy cardboard flaps on continuous-motion carton erectors over its 210 mm stroke.
Actuates routing arms on conveyor lines to sort heavy wooden pallets, using its tie-rod-free extruded profile to mount flush in tight transfer spaces.
Drives the linear shuttle mechanism in automated tool changers, where the field-adjustable end cushions absorb kinetic energy to protect precision spindle tooling.
Generating 982 N of push at 0.5 MPa, this bore fits neatly between the smaller SE40 (628 N push) and the larger SE63 (1559 N push), allowing you to step up or down depending on your exact load requirement. Since this is a standard double-acting cylinder, it cannot hold a load in place if air pressure is lost or the valve is centered; a dead-load application requires a BSE rod lock or external pilot-operated check valve. The 210 mm stroke surpasses the 300 mm threshold where side-load bending becomes a concern, but for heavier radial loads, an external guide is still advised to protect the M16x1.5 rod thread and bearing. Being dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 profile cylinders, utilizing the standard PT1/4 port and standard mounting accessories.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X210 features a 50 mm bore with a 20 mm rod and an M16x1.5 rod-end thread. It delivers 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa.
Yes, the SE50X210 is dimensionally interchangeable per ISO 15552, meaning it shares the exact mounting footprint and PT1/4 port locations of other standard ISO 15552 profile cylinders for direct retrofitting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.