
The AirTAC SE50 Standard Cylinder SE50X210S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 210mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X210S is a double-acting, single-rod ISO 15552 profile cylinder built for demanding pneumatic tasks. It yields 982 N of push force and 825 N of pull force at 0.5 MPa, operating via a PT1/4 port and a 20 mm hard-chrome rod. Because the stroke is 210 mm, it is supplied as a non-standard, made-to-order length.
Its extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames. The integrated magnet (-S) pairs directly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-travel detection. Furthermore, field-adjustable air cushioning at both ends allows you to tune end-stop deceleration for the specific load mass.
| Model | Airtac SE50 Standard Cylinder SE50X210S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing flap on a high-speed logistics conveyor, using the 210 mm stroke to swing packages smoothly into secondary sorting lanes.
Secures aluminum castings inside a CNC machining center, applying 982 N of push force at 0.5 MPa to hold parts rigidly against cutting forces.
Drives the mechanical folder arms on a case erector, relying on the adjustable end cushions to prevent hard impacts at the end of the 210 mm travel.
If 982 N of push at 0.5 MPa is too much, step down to the 40 mm bore which supplies 628 N. If your load requires more power, step up to the 63 mm bore delivering 1559 N. As a true ISO 15552 cylinder, this model offers a dimensionally interchangeable footprint, meaning it serves as a direct replacement for other ISO 15552 profile cylinders without altering your mounting hardware.
Because the 210 mm stroke exceeds the standard 200 mm increment, it is manufactured as a non-standard length. At this stroke length, the 20 mm rod and M16x1.5 thread experience increased bending moments under heavy side loads. For optimal bearing life, guide the load externally rather than relying solely on the piston rod. Note that this cylinder cannot hold a load if air pressure drops; it drifts, so use a BSE rod lock for fail-safe holding.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this double-acting cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force reaches 1374 N. The maximum allowable push force is 200 kgf when operating at the maximum pressure of 1.0 MPa.
No, the SE50X210S cannot hold a load if air pressure is lost or the valve is centered; the piston will drift. Additionally, the field-adjustable air cushioning at both ends only decelerates the piston near the stroke end and does not function as a braking lock. For secure load holding, consider the BSE series with a built-in rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.