
The AirTAC SE50 Standard Cylinder SE50X217S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 217mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X217S is a double-acting, single-rod ISO 15552 profile cylinder featuring a 50 mm bore and a 217 mm non-standard stroke. It generates 982 N of push force and 825 N of pull force at 0.5 MPa, making it well-suited for medium-duty automation tasks. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows you to tune the end-stop deceleration via a setscrew, softening impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE50 Standard Cylinder SE50X217S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 217 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×217 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push at 0.5 MPa needed to fold and erect heavy corrugated carton flaps during case packing operations.
Actuates a routing arm at 217 mm stroke to push heavy pallets onto secondary packaging lines without tie-rod interference.
Shifts a heavy machine tool safety door open and closed, using the built-in magnet to trigger DMSE electronic sensors for safe interlocking.
If your application requires slightly less thrust, the adjacent 40 mm bore provides 628 N of push at 0.5 MPa; conversely, stepping up to the 63 mm bore yields 1559 N for heavier loads. Because this is a 217 mm non-standard stroke, expect a made-to-order lead time. As a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for comparable ISO 15552 cylinders, sharing identical mounting footprints and PT1/4 port locations. The -S magnet enables CMSE/DMSE sensor integration. Note that this plain double-acting cylinder does not hold its load when air is exhausted; if your process requires static holding without live pressure, consider the BSE rod-lock variant. For this 217 mm stroke, verify side loads and use an external guide to prevent rod-bearing bending.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X217S delivers 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa.
Yes, the SE50X217S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting interface and PT1/4 port locations as other standard ISO 15552 profile cylinders, allowing for a direct retrofit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.