verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X220

The AirTAC SE50 Standard Cylinder SE50X220 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 220mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke220 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$85.11 $92.61Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X220

The AirTAC SE50X220 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force and 825 N of pull force at 0.5 MPa. Its 220 mm stroke is a non-standard, made-to-order length designed for applications requiring extended travel beyond the standard 200 mm option. The extruded aluminum square barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while maintaining the standardized ISO 15552 interface.

Field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s. This specific SKU is supplied without a built-in magnet, meaning it is not equipped for AirTAC CMSE or DMSE electronic position sensing out of the box. The barrel features machined sensor grooves on three sides, allowing for easy retrofit of switches if sensing requirements change later.

Airtac SE50 Standard Cylinder SE50X220 Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X220
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke220 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X220

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×220Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X220 Is Used

conveyor_belt

Pallet Diverters

Actuates diverter arms on packaging conveyor lines, utilizing the 982 N push force at 0.5 MPa to redirect heavy goods reliably.

precision_manufacturing

CNC Door Operators

Drives the sliding safety doors of CNC machining centers, where the 220 mm non-standard stroke accommodates wide machine access openings.

warehouse

Carton Erectors

Folds and squares corrugated cardboard blanks in automated case erectors, benefiting from the field-adjustable cushioning to soften end stops during high-speed cycling.

Is the Airtac SE50 Standard Cylinder SE50X220 the Right Cylinder?

Selecting the SE50X220 is appropriate when your mechanism requires roughly 100 kgf of thrust, as it provides 982 N push at 0.5 MPa (1374 N at 0.7 MPa). If you need to step down to save air and space, the adjacent 40 mm bore provides 628 N push at 0.5 MPa. If your load demands more force, stepping up to the 63 mm bore yields 1559 N push at 0.5 MPa. Because this is a plain double-acting cylinder, it will drift and drop its load if air pressure is lost or the valve centers; for position-holding safety, consider the AirTAC BSE rod-lock variant or an external pilot-operated check valve.

With a 220 mm stroke, the 20 mm diameter piston rod is subjected to increased bending moments under side loads. For this non-standard length, incorporating an external guide rail is strongly recommended to prevent rod-bearing wear and premature seal failure. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders using the same PT1/4 port and 50 mm bore mounting hardware.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X220 FAQ

The SE50X220 provides 982 N of push force and 825 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 1374 N. The maximum allowable push force is 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE50X220 is dimensionally interchangeable per ISO 15552 standards. It uses a standard PT1/4 port and a 50 mm bore mounting interface, allowing it to drop in as a replacement for other ISO 15552 profile cylinders without modifying the existing frame.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X220

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X220 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.