
The AirTAC SE50 Standard Cylinder SE50X220S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 220mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X220S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It delivers a robust 982 N push force at 0.5 MPa (1374 N at 0.7 MPa) across its 220 mm stroke. The square extruded aluminum barrel omits external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush against machine frames, simplifying spatial constraints in tight cells.
Equipped with a built-in magnet (-S), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard end stops during high-speed operations up to 800 mm/s without relying on fixed rubber bumpers.
| Model | Airtac SE50 Standard Cylinder SE50X220S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding and sealing mechanisms on continuous-motion carton erecting lines, utilizing the 220 mm stroke and 982 N push to reliably open and square heavy corrugated blanks at high cycle rates.
Actuates pneumatic pop-up transfer blades on modular conveyor belts, using the 50 mm bore force to push loaded pallets smoothly onto perpendicular routing lanes without stalling the main drive.
Applies downward pressure on press-bed hold-downs in automated sheet metal flattening stations, where the adjustable air cushions absorb the kinetic energy of the 20 mm rod returning at high speeds.
This 50 mm bore yields 982 N of push at 0.5 MPa, making it a versatile mid-range actuator. If your assembly requires less force, the 40 mm bore neighbor provides 628 N push at 0.5 MPa; conversely, stepping up to the 63 mm bore grants 1559 N push at 0.5 MPa for heavier payloads. The PT1/4 port matches the 50 mm bore standard, ensuring optimal airflow for the 30-800 mm/s speed range.
Because this model features a 220 mm stroke, the unsupported piston rod is susceptible to bending under heavy lateral loads; utilizing an external guide rail prevents rod-bearing wear and premature seal failure. As a standard double-acting cylinder, the SE50X220S will drift if air pressure is lost or the valve is centered; applications requiring absolute position holding without live pressure should pivot to the AirTAC BSE rod-lock series. Furthermore, its standardized ISO 15552 mounting footprint allows direct replacement for competing profile cylinders without altering existing mounting hardware.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The 50 mm bore generates 982 N of push force and 825 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 1374 N, with an absolute maximum push of 200 kgf at 1.0 MPa. It features a PT1/4 threaded air port and a 20 mm diameter piston rod with an M16x1.5 thread.
No, the SE50X220S is a standard double-acting cylinder and will drift if air is lost or the valve is centered. The adjustable air cushion only decelerates the piston near the stroke ends and does not function as a mechanical lock. For fail-safe load holding, use the AirTAC BSE series rod lock cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.