
The AirTAC SE50 Standard Cylinder SE50X229S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 229mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X229S is a double-acting single-rod profile cylinder operating to the ISO 15552 standard. It features a 50 mm bore and a custom 229 mm stroke, generating 982 N of push force at 0.5 MPa. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
Equipped with a built-in magnetic piston (-S), this unit interfaces directly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune the deceleration profile, softening hard mechanical stops during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X229S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 229 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×229 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push required to cleanly fold heavy cardboard flaps on continuous packaging lines, using the 229 mm stroke to clear the box path during retraction.
Actuates a routing gate to redirect heavy wooden pallets, relying on the adjustable end cushions to absorb the kinetic energy of the shifting mass without slamming.
Opens and closes machine tool safety enclosures, utilizing the -S magnet and DMSE electronic sensors to confirm the door is fully closed before the spindle ramps up.
Selecting this 50 mm bore makes sense when an application requires 982 N push at 0.5 MPa but the 628 N output of a 40 mm bore is insufficient. If your load demands more power, stepping up to a 63 mm cylinder yields 1559 N of thrust. Because this model has a non-standard 229 mm stroke, expect a made-to-order lead time. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement sharing standard mounting accessories, PT1/4 ports, and a 20 mm rod.
Since the 229 mm stroke approaches the mid-range of the 50 mm series, the unsupported piston rod is subjected to lateral stress during extension. For heavy off-center loads, incorporate an external guide rail to prevent rod-bearing wear and premature seal failure. Note that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load in place if air pressure is lost.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s.
Yes. The SE50X229S shares the exact ISO 15552 / VDMA 24562 mounting dimensions, meaning it is dimensionally interchangeable with other ISO 15552 profile cylinders of the same bore size. You can reuse existing mounting brackets and front/reward flanges.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.