
The AirTAC SE50 Standard Cylinder SE50X230 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 230mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X230 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This clean profile simplifies retrofitting into tight automation cells.
Because this 230 mm stroke exceeds the standard 200 mm increment, it is supplied as a non-standard, made-to-order unit. The cylinder relies on a field-adjustable pneumatic cushion at both ends to decelerate the Ø20 mm rod smoothly, and since this SKU lacks the -S magnet, it operates without CMSE or DMSE position sensing.
| Model | Airtac SE50 Standard Cylinder SE50X230 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing flap on a packaging conveyor, using the 982 N push force to reliably pivot heavy cardboard cartons at high cycle rates.
Operates a safety gate on an injection molding cell, utilizing the 230 mm stroke to fully clear the mold area for robotic extraction.
Deploys a physical stop pin on a pallet assembly line, where the 825 N pull force safely retracts the pin to release loaded pallets.
Selecting this 50 mm bore makes sense when a 40 mm bore (628 N push @0.5 MPa) is underpowered, but an 80 mm bore (2513 N push @0.5 MPa) would be physically oversized. The 230 mm stroke is a non-standard length, so expect a made-to-order lead time. With a PT1/4 port and a 30 mm cushion length, it drops directly into existing ISO 15552 mounting hardware.
At 230 mm of travel, the unsupported rod length increases bending moments under side loads; pairing this cylinder with an external guide rail prevents premature rod-bearing wear. Remember that the adjustable air cushion only softens end-of-stroke impacts—it is not a locking device. If your process must hold a vertical load without live air pressure, you must integrate a BSE rod lock or an external pilot-operated check valve.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X230 is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other 50 mm ISO 15552 profile cylinders, matching the standard PT1/4 port and mounting footprint without altering your existing hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.