
The AirTAC SE50 Standard Cylinder SE50X235S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 235mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X235S is a double-acting, single-rod ISO 15552 profile cylinder delivering a solid 982 N push force at 0.5 MPa. Its extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machinery spaces.
Because this unit includes the -S magnet, it is fully primed for AirTAC CMSE reed and DMSE electronic position sensing. Field-adjustable pneumatic cushioning at both ends lets you dial out hard end-stop impacts dynamically, rather than relying on a fixed rubber bumper.
| Model | Airtac SE50 Standard Cylinder SE50X235S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 235 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×235 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding and sealing mechanisms on continuous-motion carton formers, using the 235 mm stroke to fully open flaps before adhesive application.
Actuates routing flaps on packaging conveyors, providing the 982 N push needed to reliably divert heavy corrugated boxes between sorting lanes.
Secures cast aluminum housings inside machining centers, leveraging the 0.5 MPa pull force to hold parts firmly against cutting resistance.
Generating 982 N of push at 0.5 MPa, this 50 mm bore sits neatly between the 40 mm (628 N) and 63 mm (1559 N) options, letting you step down for lighter clamping or up for heavier pressing. Note that a standard SE cylinder will drift if air is lost; for positive load holding, look to the BSE rod-lock variant. At 235 mm of stroke, the 20 mm rod and M16x1.5 thread handle moderate side loads, but an external guide is recommended for heavy off-center loads. As a true ISO 15552 cylinder, it drops in seamlessly with standardized mounting accessories and PT1/4 ports.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, it provides 982 N of push and 825 N of pull force. At 0.7 MPa, the push increases to 1374 N, with a maximum push of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X235S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and PT1/4 port locations as comparable profile cylinders. The built-in -S magnet also allows direct pairing with AirTAC CMSE reed or DMSE electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.