
The AirTAC SE50 Standard Cylinder SE50X240 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 240mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X240 is a double-acting single-rod ISO 15552 profile cylinder built on a square extruded aluminum barrel without external tie rods. Delivering 982 N of push force at 0.5 MPa (1374 N at 0.7 MPa), it provides robust linear motion for mid-range automation. The clean profile design makes it easy to mount flush against machine frames while resisting corrosion.
This 50 mm bore unit features a PT1/4 port and a 20 mm hard-chrome piston rod with an M16x1.5 thread. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard impacts at operating speeds up to 800 mm/s. This specific SKU is configured without a built-in magnet, meaning it is not ready for CMSE or DMSE position sensing out of the box.
| Model | Airtac SE50 Standard Cylinder SE50X240 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
With 982 N of push force at 0.5 MPa, this cylinder reliably drives the folding mechanisms on continuous-motion carton erectors, precisely handling heavy cardboard at high cycling rates.
The 240 mm stroke extends a robust physical stop barrier on roller conveyors, securely halting 50 kg loaded pallets before the indexing station without bouncing.
Utilizing the extruded profile barrel for flush mounting, this unit automates the sliding safety door on CNC lathes, benefiting from the adjustable cushion to soften the 240 mm travel stop.
Choosing this 50 mm bore gives you 982 N push at 0.5 MPa. If your load requires less force, stepping down to a 40 mm bore yields 628 N push, while stepping up to a 63 mm bore provides 1559 N push. Because the 240 mm stroke exceeds 300 mm is false here, but at 240 mm you should still evaluate side loading on the 20 mm rod and use an external guide if the load is heavy or unsupported.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders for direct retrofits. To match this exact configuration, specify a 50 mm bore, 240 mm stroke, PT1/4 port, basic mounting, and no magnet. Remember that a plain double-acting cylinder does not hold a load if air pressure is lost; the piston will drift, so use a BSE rod lock for fail-safe holding.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X240 generates 982 N push and 825 N pull at 0.5 MPa. At 0.7 MPa, the push force is 1374 N. The maximum allowable push force is 200 kgf (1961 N) at the maximum operating pressure of 1.0 MPa.
No, a standard double-acting SE cylinder will drift if air pressure is lost or the valve is centered. The adjustable air cushion only decelerates the piston near the stroke end; it is not a locking mechanism. For position holding, consider the AirTAC BSE series with a built-in rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.