
The AirTAC SE50 Standard Cylinder SE50X250SCB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 250mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X250SCB is a double-acting single-rod ISO 15552 profile cylinder engineered for 982 N push and 825 N pull at 0.5 MPa. Driven by a 50 mm bore and 250 mm stroke, it operates at speeds from 30-800 mm/s using a PT1/4 port. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that resists corrosion and mounts flush against machine frames.
This specific configuration includes a built-in magnet (-S) for non-contact position sensing via CMSE reed or DMSE electronic switches fitted into the body grooves. It carries a CB double clevis mounting accessory for pivoting articulation, while the field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration for moving loads.
| Model | Airtac SE50 Standard Cylinder SE50X250SCB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the mechanical arms that fold corrugated carton flaps, utilizing the 982 N push force and CB clevis to accommodate the pivoting arc of the packaging linkage.
Actuates a routing diverter on a packaging line, where the 250 mm stroke provides full gate clearance and the integrated magnet triggers DMSE sensors to confirm gate position.
Ejects formed sheet metal parts from a hydraulic press bed, relying on the adjustable pneumatic cushion to soften the end stop despite the rapid 30-800 mm/s travel speed.
Selecting this 50 mm bore makes sense when you need 982 N of push force at 0.5 MPa. If your application is lighter, stepping down to the 40 mm bore yields 628 N push, whereas moving up to the 63 mm bore provides 1559 N push for heavier actuation. The CB double clevis mount is ideal for pivoting mechanisms requiring rotational alignment along the pin axis.
Because this unit features a 250 mm stroke, the unsupported rod length extends significantly during actuation; you should incorporate an external guide to prevent rod-bearing bending under side loads. Remember that the adjustable air cushion only decelerates the piston near stroke end and does not function as a lock. If the machine loses air pressure or the valve centers, the load will drift, requiring a BSE rod lock or external pilot-operated check valve for secure holding.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N push and 825 N pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X250SCB is dimensionally interchangeable per ISO 15552 standards. You can drop it in to replace other ISO 15552 profile cylinders sharing the same 50 mm bore, 250 mm stroke, PT1/4 port, and CB double clevis mounting dimensions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.