
The AirTAC SE50 Standard Cylinder SE50X250SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 250mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X250SLB is a double-acting, single-rod ISO 15552 profile cylinder engineered for industrial pneumatics. Built with a 50 mm bore and 250 mm stroke, it generates 982 N of push force and 825 N of pull force at 0.5 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact footprint that resists corrosion and mounts flush against machine frames.
This specific configuration includes an LB foot mounting bracket for secure base mounting and a built-in magnet (-S) for non-contact position sensing. The integrated magnet interfaces directly with AirTAC CMSE reed and DMSE electronic sensors fitted into the three-sided sensor grooves. Field-adjustable air cushions at both stroke ends allow technicians to tune end-of-stroke deceleration, preventing harsh impacts during high-speed 30-800 mm/s operations.
| Model | Airtac SE50 Standard Cylinder SE50X250SLB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 982 N of push force at 0.5 MPa to reliably open and fold heavy corrugated carton flaps on continuous packaging lines operating at 30-800 mm/s.
Deploys the 250 mm stroke to actuate routing gates on conveyor systems, smoothly redirecting heavy pallets between processing lanes with LB foot mount stability.
Utilizes the built-in S magnet with DMSE sensors for precise 250 mm positioning of sheet metal backgauges, ensuring accurate bending angles in press machinery.
When sizing this 50 mm bore model, consider stepping down to the 40 mm bore (628 N push at 0.5 MPa) for lighter-duty clamping, or moving up to the 63 mm bore (1559 N push at 0.5 MPa) if your payload demands greater thrust. As a standard double-acting cylinder, the SE50X250SLB relies on continuous air pressure to maintain its position; if air is lost or the valve centers, the piston will drift and cannot hold a load. For secure load holding without live pressure, integrate an external pilot-operated check valve or explore the BSE rod-lock variant.
Because the 250 mm stroke creates an extended rod overhang, the 20 mm piston rod and M16x1.5 thread experience higher bending moments under lateral loads. To prevent premature rod-bearing wear, pair this cylinder with an external linear guide to absorb radial stresses. This model uses a PT1/4 port and features an LB mounting accessory, ensuring ISO 15552 dimensional interchangeability for seamless retrofitting.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50 mm bore cylinder delivers 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push force of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X250SLB is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing foot mount (LB) setups and use standard PT1/4 port connections without modifying the machine footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.