
The AirTAC SE50 Standard Cylinder SE50X25S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 25mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X25S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa across a compact 25 mm stroke. Its square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machine envelopes while resisting impact damage.
This specific unit includes a built-in magnet (-S) for non-contact position sensing, seamlessly supporting AirTAC CMSE reed and DMSE electronic solid-state switches. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration precisely, softening hard mechanical impacts during rapid 30-800 mm/s cycling.
| Model | Airtac SE50 Standard Cylinder SE50X25S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 982 N of precise clamping force to secure aluminum housings during CNC machining, utilizing the 25 mm short stroke for rapid actuation.
Drives a folding arm on automated packaging lines, relying on the built-in magnet and DMSE sensor to verify flap position at high cycle rates.
Actuates a routing gate in electronics assembly, using the tie-rod-free extruded profile to mount flush against narrow conveyor frames.
At 0.5 MPa, this 50 mm bore generates 982 N of push force. If your payload is lighter, stepping down to the 40 mm bore yields 628 N, whereas heavier loads require stepping up to the 63 mm bore for 1559 N. This SE50X25S is dimensionally interchangeable per ISO 15552, meaning it serves as a direct replacement for other standard profile cylinders without altering mounting footprints.
Because it is a standard double-acting cylinder, it cannot hold a load if air pressure is lost or the valve is centered; the piston will drift. For position-holding safety, consider the AirTAC BSE rod-lock variant. To match this exact configuration, specify: 50 mm bore, 25 mm stroke, PT1/4 port, basic mounting, and the -S magnet.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa.
Yes, the SE50X25S is dimensionally interchangeable per ISO 15552 standards. It shares the same mounting interface and PT1/4 port size as other ISO 15552 profile cylinders, allowing for a seamless direct retrofit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.