
The AirTAC SE50 Standard Cylinder SE50X25SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 25mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X25SFTC is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a 982 N push at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with a built-in magnet for CMSE or DMSE position sensing, this 50 mm bore unit features field-adjustable air cushioning at both ends to soften end-of-stroke impacts. The integrated FTC center trunnion mount provides a pivoting anchor point ideal for articulating mechanisms.
| Model | Airtac SE50 Standard Cylinder SE50X25SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Ideal for securing aluminum extrusions in CNC machining fixtures, using the 982 N push force to lock parts firmly without deflection.
Provides rapid, repeatable folding of corrugated cardboard flaps on automated packaging lines, leveraging the 30-800 mm/s speed range.
The FTC trunnion mount allows this 50 mm bore cylinder to pivot sorting gates smoothly on logistics conveyors, handling high-cycle routing tasks.
This 50 mm bore generates 982 N push at 0.5 MPa. If your application requires less force, stepping down to the 40 mm bore yields 628 N; if you need more clamping power, the 63 mm bore provides 1559 N. The adjustable pneumatic cushioning only decelerates the piston near stroke end and does not function as a brake; if the machine loses air pressure, the rod will drift, so an external rod lock like the BSE is required for fail-safe holding.
With its short 25 mm stroke, side-load stress on the rod bearing is minimal compared to longer strokes. Because it adheres to the ISO 15552 mounting interface, you can directly swap this cylinder with any other ISO 15552 profile cylinder using existing FTC hardware and PT1/4 ports.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE50X25SFTC is dimensionally interchangeable per ISO 15552, meaning it serves as a direct replacement for other ISO 15552 profile cylinders. You can reuse existing mounting hardware, including the FTC center trunnion bracket, and connect to the standard PT1/4 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.