
The AirTAC SE50 Standard Cylinder SE50X25SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 25mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X25SN is a double-acting single-rod ISO 15552 profile cylinder with a 50 mm bore and 25 mm stroke. It delivers 982 N of push force and 825 N of pull force at 0.5 MPa, making it well-suited for short, high-impact clamping tasks. The extruded aluminum barrel lacks external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This unit features a built-in magnet for CMSE and DMSE position sensing, plus an NBR seal for standard operating temperatures. The field-adjustable air cushioning at both ends is a true deceleration mechanism, letting technicians turn a screw to soften hard end stops during rapid 30-800 mm/s cycles.
| Model | Airtac SE50 Standard Cylinder SE50X25SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 982 N push at 0.5 MPa to lock aluminum castings onto a machining center table, relying on the 25 mm stroke for rapid engagement.
Drives a short mechanical arm to fold corrugated cardboard flaps, utilizing the NBR seal for longevity in high-speed packaging lines.
Actuates a diverting gate on a conveyor to route printed circuit board panels, using the built-in magnet to trigger DMSE electronic sensors.
Choose this 50 mm bore when a 40 mm cylinder (628 N push @0.5 MPa) lacks power or a 63 mm unit (1559 N push @0.5 MPa) is too bulky. Because the 25 mm stroke is very short, side-load bending is minimal, but always verify the rod-end thread M16x1.5 matches your mechanics. As a plain double-acting cylinder, it cannot hold a load if air pressure drops; use a BSE rod lock for fail-safe positioning. It is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders sharing the PT1/4 port and standard mounting interface.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa.
Yes. The SE50X25SN is dimensionally interchangeable per ISO 15552, meaning it serves as a direct replacement for other ISO 15552 profile cylinders sharing the same 50 mm bore, PT1/4 port, and mounting interface.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.