
The AirTAC SE50 Standard Cylinder SE50X260 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 260mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X260 is a double-acting single-rod ISO 15552 profile cylinder, delivering a robust 982 N push force at 0.5 MPa and a 1374 N push at 0.7 MPa. It features a square extruded aluminum barrel without external tie rods, creating a compact, corrosion-resistant body that mounts flush against machine frames.
This 50 mm bore unit includes field-adjustable air cushioning at both ends, allowing technicians to dial in end-of-stroke deceleration via a set screw rather than relying on a fixed bumper. Because this specific SKU lacks the -S magnet code, it is not natively equipped for AirTAC CMSE or DMSE position sensing without modification.
| Model | Airtac SE50 Standard Cylinder SE50X260 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 982 N push force at 0.5 MPa to deflect PET bottles onto secondary packaging lanes without stalling the main conveyor flow.
Extends 260 mm to fold heavy cardboard flaps on automated case erectors, relying on the adjustable cushion to soften the end stop at high cycle speeds.
Secures machining pallets inside modular fixtures, taking advantage of the 50 mm bore's 200 kgf max hold and flush-mount extruded profile to fit tight cell envelopes.
If your application requires less force, stepping down to the 40 mm bore yields a 628 N push at 0.5 MPa, while moving up to the 63 mm bore provides a 1559 N push at 0.5 MPa. As a standard double-acting cylinder, the SE50X260 will drift if air pressure is lost or the valve centers; it cannot hold a load mid-stroke without live pressure, so consider a BSE rod lock for fail-safe holding.
With a 260 mm stroke, the 20 mm rod and M16x1.5 thread carry moderate side loads, but long unsupported extensions still require an external guide to prevent rod-bearing bending. This cylinder is dimensionally interchangeable per ISO 15552, meaning it serves as a direct replacement for other ISO 15552 profile cylinders using the same PT1/4 port and standard mounting hardware.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X260 provides a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf when operating at the 1.0 MPa pressure limit.
It is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders. However, it is a standard double-acting cylinder, so it does not hold its load or position if air is lost or the valve is centered; you would need a BSE rod lock variant for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.