
The AirTAC SE50 Standard Cylinder SE50X260S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 260mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X260S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa. Featuring a 50 mm bore and 260 mm stroke, it integrates a built-in magnet for position sensing.
Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The field-adjustable air cushioning at both ends allows you to tune end-of-stroke deceleration via a screw, protecting payloads from harsh impacts.
| Model | Airtac SE50 Standard Cylinder SE50X260S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding mechanism on automated carton erectors, utilizing the 982 N push force to snap heavy cardboard flaps into position securely.
Actuates sorting gates on packaging conveyor lines, where the 260 mm stroke provides the reach to redirect products between parallel belts.
Opens and closes safety interlock doors on CNC lathes, using the built-in magnet to trigger DMSE electronic sensors confirming the door is sealed.
At 0.5 MPa, this 50 mm bore generates 982 N of push force. If your application requires less force, stepping down to the 40 mm bore yields 628 N, while stepping up to the 63 mm bore provides 1559 N for heavier loads. This SE50X260S configuration includes a PT1/4 port, a 260 mm stroke, and a built-in magnet for CMSE or DMSE sensors.
Because the 260 mm stroke exceeds 300 mm? No, but at longer extensions the 20 mm rod and M16x1.5 thread face increased bending moments from side loads; an external guide is recommended for unsupported masses. Note that a standard SE cylinder relies on live air pressure to hold position and will drift if air is lost or a valve centers—use a BSE rod lock variant if absolute holding is required.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X260S delivers a push force of 982 N at 0.5 MPa and 1374 N at 0.7 MPa, with a pull force of 825 N at 0.5 MPa. The maximum push force is 200 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes, the SE50X260S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and interface of other ISO 15552 profile cylinders. You can use it as a direct replacement without changing your existing mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.