
The AirTAC SE50 Standard Cylinder SE50X265S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 265mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X265S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that simplifies mounting and maximizes machine space efficiency.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a screw, softening hard end stops during high-speed 30-800 mm/s operations.
| Model | Airtac SE50 Standard Cylinder SE50X265S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 265 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×265 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding mechanism on packaging lines at 982 N push, utilizing the 265 mm stroke to cleanly open and fold corrugated carton flaps at high cycling speeds.
Actuates routing gates on parcel conveyor systems, where the 825 N pull force reliably retracts the 20 mm rod to redirect packages into sorting chutes.
Positions sample carousels in automated laboratory centrifuges, using the CMSE/DMSE magnet compatibility to confirm exact loading and unloading positions.
If your application requires less force, the adjacent SE40X265S provides 628 N of push at 0.5 MPa, whereas stepping up to the SE63X265S yields 1559 N for heavier loads. Because this is a standard double-acting cylinder, it will not hold a load if air pressure drops or the valve centers; if your process demands mechanical position holding, consider the BSE rod-lock variant.
With a 265 mm stroke, the 20 mm rod and thread experience bending moments under side loads. For optimal bearing life, pair this cylinder with an external guide rail to prevent rod-bearing damage. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing standard mounting hardware, a PT1/4 port, and M16x1.5 rod threads.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X265S generates a push force of 982 N at 0.5 MPa and 1374 N at 0.7 MPa. The pull force is 825 N at 0.5 MPa. The maximum push force is 200 kgf when operating at the maximum 1.0 MPa pressure.
Yes, the SE50X265S is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting interface, PT1/4 port, and M16x1.5 rod thread, allowing it to function as a direct replacement for other ISO 15552 profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.