
The AirTAC SE50 Standard Cylinder SE50X270 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 270mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X270 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force and 825 N of pull force at 0.5 MPa. Driven by filtered air over a 30-800 mm/s speed range, it features a 50 mm bore and a 270 mm stroke. Its square extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant profile that mounts flush against machine frames while protecting internal mechanics from snagging.
This model relies on field-adjustable pneumatic cushioning at both ends, allowing technicians to dial in end-of-stroke deceleration via a set screw rather than absorbing harsh impacts with a fixed bumper. Since this specific SKU lacks the built-in magnet option, it does not support CMSE or DMSE position sensors out of the box. The standard PT1/4 port and M16x1.5 rod thread ensure straightforward integration into existing pneumatic infrastructures.
| Model | Airtac SE50 Standard Cylinder SE50X270 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Driving the folding jaws of a continuous-motion carton erector, where the 982 N push force securely creases heavy corrugated board and the 270 mm stroke accommodates varying box depths.
Actuating a divert arm on a packaging line conveyor to lane out filled pallets, utilizing the smooth tie-rod-free barrel profile to prevent friction against side guides.
Operating the sliding safety door of a CNC machining center, relying on the adjustable end cushions to soften the 270 mm travel and prevent harsh slamming at high cycle rates.
When sizing this actuator, compare its 982 N push at 0.5 MPa against the adjacent bores: stepping down to a 40 mm bore yields 628 N, while stepping up to a 63 mm bore provides 1559 N. This SE50X270 is dimensionally interchangeable per ISO 15552, meaning it serves as a direct replacement for other ISO 15552 profile cylinders using identical mounting hardware and a PT1/4 port. Because the 270 mm stroke is substantial, the unsupported piston rod is susceptible to bending under lateral loads; an external guide rail should be installed to prevent rod-bearing wear. Note that the air cushion only decelerates the piston near stroke end and will not hold a load if air pressure is lost.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X270 generates 982 N of push force and 825 N of pull force at 0.5 MPa, and 1374 N of push at 0.7 MPa. It reaches a maximum push force of 200 kgf at its maximum operating pressure of 1.0 MPa.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders using the same mounting footprint and PT1/4 port. This specific SKU lacks a built-in magnet, so it cannot directly mount CMSE or DMSE position sensors without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.