
The AirTAC SE50 Standard Cylinder SE50X270S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 270mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X270S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
Equipped with a built-in magnet (S option), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. Field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, smoothly dampening the 270 mm travel without relying on fixed rubber bumpers.
| Model | Airtac SE50 Standard Cylinder SE50X270S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates routing flaps on high-speed logistics lines, using the 982 N push force and 270 mm stroke to redirect heavy cartons between sorting lanes.
Extends to grip and stabilize stretch-wrap rolls on automated palletizers, relying on the magnetic piston and DMSE sensors to confirm grip position.
Opens and closes safety interlock doors on machining centers, utilizing the adjustable end cushions to soften the 270 mm travel and prevent slamming.
Delivering 982 N push at 0.5 MPa, this 50 mm bore fits neatly between the 40 mm option (628 N push) for lighter duties and the 63 mm option (1559 N push) for higher load demands. If an application requires holding a load vertically without continuous air pressure, note that a standard SE cylinder will drift; you must integrate an external pilot-operated check valve or switch to the BSE rod-lock variant.
Because the 270 mm stroke creates extended leverage, long unsupported travel can induce side-load bending on the Ø20 mm rod bearing; utilize an external guide to prevent premature wear. For direct retrofits, this dimensionally interchangeable ISO 15552 cylinder shares standard mounting accessories, a PT1/4 port, and M16x1.5 rod threads.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.7 MPa, the push force increases to 1374 N. The maximum push force is 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE50X270S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the same mounting footprint, PT1/4 port, and M16x1.5 rod thread as other standard ISO 15552 profile cylinders for seamless retrofitting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.