
The AirTAC SE50 Standard Cylinder SE50X274S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 274mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X274S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 982 N and a pull force of 825 N at 0.5 MPa. Its 274 mm stroke is a non-standard made-to-order length, providing exact reach for specialized machine movements.
The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies bracket installation. Equipped with a built-in magnet, this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection.
| Model | Airtac SE50 Standard Cylinder SE50X274S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 274 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×274 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 982 N push force to deflect heavy wooden pallets on packaging lines, while the 274 mm stroke ensures full retraction clear of the conveyor belt path.
Relies on the 825 N pull force to fold corrugated cardboard flaps prior to taping, with the magnetic piston triggering DMSE sensors for precise timing.
Moves populated circuit board trays into an inspection fixture, utilizing the adjustable end cushions to soften impacts and protect delicate solder joints.
When sizing this actuator, compare its 982 N push force against adjacent bores: the SE40 provides 628 N, while the SE63 steps up to 1559 N at 0.5 MPa. Because the 274 mm stroke is non-standard, expect a made-to-order lead time. For this length, the Ø20 mm rod and M16x1.5 thread handle moderate side loads, but an external guide rail is recommended to prevent rod-bearing bending.
As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard 50 mm bore, 274 mm stroke unit with a PT1/4 port. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If your process requires static holding without air pressure, specify a BSE rod lock variant.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa it provides 982 N push and 825 N pull. At 0.7 MPa the push increases to 1374 N. The maximum push force is 200 kgf at the 1.0 MPa operating pressure limit.
Yes, the SE50X274S shares the exact ISO 15552 mounting dimensions and PT1/4 port size, allowing it to serve as a direct replacement for any standard 50 mm profile cylinder without changing your mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.