
The AirTAC SE50 Standard Cylinder SE50X275S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 275mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X275S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. Operating at 0.15-1.0 MPa, it delivers a push force of 982 N and a pull force of 825 N at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine envelopes.
This specific configuration includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, effectively softening hard impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE50 Standard Cylinder SE50X275S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizes the 982 N push force and 275 mm stroke to route plastic bottles between filling lanes without stalling the conveyor flow.
Deploys the 275 mm travel to fold corrugated cardboard flaps, relying on the adjustable cushion to prevent tearing at high speeds.
Leverages the built-in magnet with DMSE sensors to confirm precise 275 mm extension for moving test tube racks into scanning position.
Choosing this 50 mm bore depends on your load requirements; it provides a 982 N push at 0.5 MPa. If your application demands less force, stepping down to the 40 mm bore yields 628 N, while moving up to the 63 mm bore provides 1559 N for heavier loads. Keep in mind that a standard SE cylinder does not hold its position if air pressure is lost; if your workflow requires static load holding during an air drop, you must integrate a BSE rod lock or an external pilot-operated check valve.
Because the 275 mm stroke creates a long unsupported rod span, side loads can induce bending moments on the rod bearing. For optimal longevity and to prevent premature seal wear, mount an external guide rail to support the load and absorb lateral forces. As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 cylinders, sharing standardized mounting hardware and footprint dimensions.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X275S provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force reaches 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X275S is dimensionally interchangeable per the ISO 15552 standard, meaning it shares the exact mounting footprint and hardware dimensions of other ISO 15552 profile cylinders. It features a PT1/4 port and a 20 mm rod diameter.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.