verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X285S

The AirTAC SE50 Standard Cylinder SE50X285S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 285mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke285 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$98.13 $105.63Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X285S

The AirTAC SE50X285S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 982 N push force at 0.5 MPa. Its extruded aluminum barrel features a clean, square profile without external tie rods, making it highly resistant to corrosion and allowing for flush mounting on machinery where space is tight.

Equipped with a built-in magnet (-S), this unit is fully compatible with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The integrated field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-stop deceleration, effectively softening impacts when cycling at speeds up to 800 mm/s.

Airtac SE50 Standard Cylinder SE50X285S Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X285S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke285 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X285S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×285Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X285S Is Used

packaging

Carton Flap Folding

Provides the 982 N push required to consistently fold heavy corrugated cardboard flaps on high-speed packaging lines, using its 285 mm stroke to clear the product path during retraction.

conveyor_belt

Pallet Diverting Arm

Actuates a routing arm to redirect pallets between conveyor belts, where the adjustable end cushions absorb the kinetic energy of the extending rod at fast cycling speeds.

view_module

PCB Router Gating

Positions gating mechanisms on PCB depaneling routers, utilizing the built-in magnet with DMSE sensors to confirm gate closure before the cutting spindle engages.

Is the Airtac SE50 Standard Cylinder SE50X285S the Right Cylinder?

Delivering 982 N of push at 0.5 MPa, this 50 mm bore is a solid middleweight choice. If your application requires less force, stepping down to the 40 mm bore yields 628 N push, while upgrading to the 63 mm bore provides 1559 N push for heavier payloads. As a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, sharing standardized mounting hardware like FA front flanges or LB foot brackets.

With a 285 mm stroke, the unsupported piston rod travels a significant distance, increasing the risk of rod-bearing bending under lateral stress; for off-center or heavy loads, incorporating an external linear guide is highly recommended. Note that the adjustable air cushion only decelerates the piston near the stroke end—it does not lock or hold the load. If position holding without live air pressure is required, consider the BSE rod lock variant.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X285S FAQ

At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE50X285S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders using the same mounting footprint and PT1/4 port size, though you should confirm overall length dimensions from the datasheet.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X285S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X285S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.