
The AirTAC SE50 Standard Cylinder SE50X290 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 290mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X290 is a double-acting single-rod ISO 15552 profile cylinder built for 290 mm strokes. It delivers a solid 982 N push force at 0.5 MPa alongside 825 N pull, making it a robust mid-range actuator. The square extruded aluminum barrel omits external tie rods entirely, yielding a compact, corrosion-resistant body that mounts flush against machine frames without protruding hardware.
This model features field-adjustable pneumatic cushioning at both ends, letting technicians dial out hard end-stop impacts via a setscrew rather than relying on a fixed rubber bumper. Since this specific SKU lacks the -S magnet code, it is not prepped for AirTAC CMSE or DMSE position sensors out of the box. The 50 mm bore carries a PT1/4 port and a 20 mm hard-chrome rod with an M16x1.5 thread.
| Model | Airtac SE50 Standard Cylinder SE50X290 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding mechanism on automated carton erectors where 982 N of push force reliably squares up heavy cardboard blanks during 290 mm travel.
Actuates a routing gate on a packaging conveyor, using the 825 N retract force to swing a diverter arm and redirect heavy product flow.
Shifts a sliding safety door on a CNC lathe, utilizing the 30 mm adjustable cushion stroke to softly decelerate the 290 mm movement at cycle end.
If 982 N of push is too much for your fixture, stepping down to the 40 mm bore drops the 0.5 MPa push to 628 N. If you need to move heavier jigs, the 63 mm bore raises that 0.5 MPa push to 1559 N. Keep in mind that a plain SE cylinder relies on live air pressure to hold its load; if the air supply drops or the valve centers, the piston will drift and cannot maintain position. For true mechanical holding, you would need to step over to the BSE rod-lock variant or use an external pilot-operated check valve.
Because this unit runs a 290 mm stroke, the unsupported 20 mm rod is subject to bending under lateral loads. For heavy off-center tooling, specify an external guide rail to prevent rod-bearing wear. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders and shares standard mounting accessories like FA front flanges or LB foot brackets.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X290 provides 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes, the SE50X290 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and can serve as a direct replacement for other ISO 15552 profile cylinders using standard PT1/4 ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.