
The AirTAC SE50 Standard Cylinder SE50X300FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 300mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X300FTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic motion control. It generates 982 N of push force and 825 N of pull force at 0.5 MPa, utilizing a 50 mm bore and a 300 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics from physical damage.
This specific SKU features an FTC mounting interface and uses a PT1/4 port. Because this configuration lacks the built-in magnet option, it does not support direct AirTAC CMSE or DMSE position sensing without modification. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune end-of-stroke deceleration via a set screw, actively absorbing kinetic energy to prevent hard mechanical impacts during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X300FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a 300 mm shifting gate on packaging conveyor lines, using the 982 N push force to redirect heavy loaded pallets without mechanical binding.
Drives the full 300 mm opening stroke of a machine tool safety door, relying on adjustable air cushions to soften the impact at the fully open position.
Pushes empty storage totes out of an automated storage retrieval aisle, where the no-tie-rod profile prevents snagging on adjacent high-bay racking.
Selecting this 50 mm bore makes sense when your load requires roughly 982 N of push force at 0.5 MPa. If your application demands less force, stepping down to the 40 mm bore yields 628 N of push, whereas upgrading to the 63 mm bore provides 1559 N for heavier actuation. Since this model uses an FTC mount and a 300 mm stroke, the extended rod length introduces a higher risk of rod-bearing bending under lateral loads; always incorporate an external linear guide to prevent premature seal wear. Remember that a standard SE cylinder cannot hold a load in place if air pressure drops or the valve centers—the piston will drift. For positive holding, consider the BSE rod-lock variant.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The 50 mm bore provides a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force reaches 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to use existing FTC mounting hardware and drop it into existing footprints. This specific SKU does not include a built-in magnet, so it will not trigger AirTAC CMSE or DMSE sensors without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.