
The AirTAC SE50 Standard Cylinder SE50X300S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 300mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X300S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force and 825 N of pull force at 0.5 MPa. Driven by filtered air over a 30-800 mm/s speed range, it features a 50 mm bore, 300 mm stroke, and a PT1/4 port. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting debris buildup.
This specific unit includes a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors, enabling precise end-of-stroke detection. The field-adjustable air cushion at both ends uses a needle screw to decelerate the piston smoothly near the 30 mm cushion zone, ensuring quiet operation without harsh mechanical impacts.
| Model | Airtac SE50 Standard Cylinder SE50X300S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing gate on a 50 mm wide goods conveyor, using the 982 N push force at 0.5 MPa to reliably pivot heavy loaded pallets onto a secondary transfer line.
Drives mechanical arms to fold corrugated cardboard flaps on a continuous packaging line, utilizing the 300 mm stroke to clear varying carton widths before the sealing head.
Opens and closes a heavy machine tool safety enclosure, relying on the -S magnet and DMSE electronic sensors to confirm the door is fully closed before the spindle starts.
Delivering 1374 N of push at 0.7 MPa, this 50 mm bore cylinder is sized for medium-duty positioning. If your payload is lighter, stepping down to the 40 mm bore reduces the push force to 628 N at 0.5 MPa, saving physical space. For heavier loads, stepping up to the 63 mm bore increases the push force to 1559 N at 0.5 MPa. Because this is a 300 mm stroke, the unsupported rod length increases the risk of rod-bearing bending under side loads; incorporating an external linear guide is strongly recommended to prevent premature seal wear.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing the exact same mounting interface and accessory footprint as other standardized profile cylinders. To replicate this exact configuration, specify the 50 mm bore, 300 mm stroke, PT1/4 port, your preferred mounting accessory (such as FA or LB), and the -S magnet for sensor tracking. Note that the adjustable air cushion only decelerates the piston near the stroke ends; it does not hold a load, so if air pressure is lost, the piston will drift.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X300S provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N. The maximum drive force is 200 kgf at 1.0 MPa, with an operating pressure range of 0.15-1.0 MPa.
Yes. The SE50X300S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting interface and center distances as other profile cylinders. You can use it as a direct replacement for any standard ISO 15552 cylinder without modifying your existing mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.