verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X305S

The AirTAC SE50 Standard Cylinder SE50X305S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 305mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke305 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$104.18 $111.68Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X305S

The AirTAC SE50X305S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It delivers a robust 982 N push force at 0.5 MPa, utilizing a 50 mm bore and a 305 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machinery spaces.

Equipped with a built-in magnet (-S), this unit interfaces seamlessly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-travel detection. Field-adjustable air cushions at both ends allow technicians to tune deceleration, softening hard end stops during high-velocity cycling. Note that 305 mm exceeds the standard 1000 mm maximum for this bore, making it a non-standard, made-to-order stroke.

Airtac SE50 Standard Cylinder SE50X305S Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X305S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke305 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X305S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×305Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X305S Is Used

conveyor_belt

Bottling Line Diverter

Utilizes the 982 N push force and 305 mm stroke to route plastic beverage containers between parallel conveyor tracks without stalling the main production flow.

package_2

Corrugated Box Flap Folder

Relies on the 825 N retract force to fold heavy cardboard flaps on automated packaging lines, with the -S magnet triggering DMSE sensors to confirm fold completion.

straighten

Printed Circuit Board Stacker

Leverages the smooth 30-800 mm/s speed range and adjustable end cushions to gently accumulate delicate PCBs at the end of a pick-and-place machine without impact damage.

Is the Airtac SE50 Standard Cylinder SE50X305S the Right Cylinder?

Selecting the SE50X305S is ideal when you need 982 N of push force at 0.5 MPa over a 305 mm span. If your application requires less force, stepping down to the 40 mm bore yields 628 N push, while moving up to the 63 mm bore provides 1559 N for heavier payloads. Because this is a non-standard 305 mm stroke, expect a made-to-order lead time.

At 305 mm, the unsupported stroke length increases the risk of rod-bearing bending under side loads; integrating an external guide rail is strongly recommended to prevent premature seal wear. Remember that the adjustable air cushion only decelerates the piston near stroke end—it does not hold a load. If your process loses air pressure and requires positional locking, you must step up to a BSE series rod lock cylinder or utilize an external pilot-operated check valve.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X305S FAQ

The SE50X305S generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum 200 kgf push at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa with a speed range of 30-800 mm/s.

Yes, the SE50X305S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and port sizes (PT1/4) of other ISO 15552 profile cylinders, allowing a direct retrofit without modifying your existing machine plates.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X305S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X305S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.