
The AirTAC SE50 Standard Cylinder SE50X320S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 320mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X320S is a double-acting single-rod ISO 15552 profile cylinder engineered for mid-range actuation, delivering a 982 N push at 0.5 MPa across a 320 mm stroke. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensors without requiring external hardware. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X320S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 320 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×320 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 320 mm stroke to push cartons between parallel packaging lanes, relying on the 982 N thrust to overcome friction without stalling.
Positions yarn guides across a wide loom bed, utilizing the built-in magnet and DMSE sensors to confirm exact thread positioning.
Indexs tool holders into the machining center, using the adjustable end cushions to prevent shock damage to precision tooling.
Selecting this 50 mm bore makes sense when a 40 mm cylinder (628 N push @0.5 MPa) lacks the thrust for a moving load, but an 80 mm bore (2513 N push @0.5 MPa) would be physically oversized and consume excess air. Because the 320 mm stroke exceeds the 300 mm threshold, the 20 mm piston rod and rod-bearing bending moment face increased leverage; always support the load with an external guide to prevent side-load damage.
As a true ISO 15552 profile cylinder, it provides direct dimensional interchangeability with other ISO 15552 cylinders, matching standard mounting accessories and porting (PT1/4). Remember that the adjustable air cushion only decelerates the piston near stroke end—it is not a locking mechanism. If the application must hold a vertical load without live air pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.7 MPa, the push force increases to 1374 N. The maximum push force is 200 kgf when operated at the 1.0 MPa pressure limit.
Yes. The SE50X320S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting interface, PT1/4 port size, and 50 mm bore footprint as other ISO 15552 profile cylinders, allowing for a direct retrofit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.