
The AirTAC SE50 Standard Cylinder SE50X325 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 325mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X325 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal components.
This 50 mm bore unit features a 325 mm stroke and a 20 mm piston rod with an M16x1.5 thread. Because this specific SKU lacks the built-in magnet suffix, it is not equipped for position sensing out of the box. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X325 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushes loaded pallets onto secondary transfer lines using 982 N of thrust, while the 325 mm stroke fully clears the conveyor belt during retraction.
Folds and secures corrugated cardboard flaps during automated carton assembly, utilizing the adjustable cushion to prevent tearing at the end of the 325 mm travel.
Actuates heavy personnel or part-routing gates on assembly lines, taking advantage of the tie-rod-free profile body for flush mounting in tight spaces.
Selecting this 50 mm bore makes sense when an application requires roughly 982 N of push at 0.5 MPa. If your load is lighter, stepping down to the 40 mm bore drops the output to 628 N, whereas stepping up to the 63 mm bore increases it to 1559 N. This model uses a PT1/4 port and standard mounting accessories, making it dimensionally interchangeable with other ISO 15552 cylinders for straightforward retrofits.
At 325 mm of stroke, the unsupported rod length increases the risk of side-load bending and rod-bearing wear. For optimal longevity, pair this cylinder with an external guide rail to prevent lateral stress on the piston rod. Remember that a plain SE cylinder relies on continuous air pressure to hold a load; if your system loses air, the piston will drift. For dead-end holding, consider the BSE rod-lock variant.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50 mm bore cylinder features a PT1/4 port and generates 982 N push and 825 N pull at 0.5 MPa. At 0.7 MPa, the push force is 1374 N, and it reaches a maximum push capacity of 200 kgf at 1.0 MPa.
Yes, it shares the exact ISO 15552 / VDMA 24562 mounting interface, allowing it to serve as a direct replacement for other standard profile cylinders. This specific SKU does not have a built-in magnet, so it cannot host CMSE or DMSE position sensors without modifying the piston.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.