
The AirTAC SE50 Standard Cylinder SE50X332SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 332mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X332SN is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 982 N at 0.5 MPa. Its 332 mm stroke is a non-standard made-to-order length, providing exact reach for specialized tooling. The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
Equipped with a built-in position magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The NBR seal handles standard operating temperatures, while the field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X332SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 332 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×332 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push and 332 mm reach required to fold heavy corrugated cardboard flaps on high-speed packaging lines, with adjustable cushions softening the stroke end.
Actuates a routing gate along a conveyor network, using the extended 332 mm stroke to clear wide pallets while the NBR seal endures typical shop air moisture.
Ejects assembled printed circuit boards from a testing fixture, relying on the built-in magnet and DMSE electronic sensors to confirm full ejection to the downstream robot.
This 50 mm bore generates 982 N of push at 0.5 MPa. If your application requires less force, stepping down to the 40 mm bore yields 628 N; conversely, moving up to the 63 mm bore provides 1559 N. Because the 332 mm stroke exceeds the standard catalog maximum of 300 mm for this bore, it is supplied as a non-standard configuration.
With a 332 mm stroke, the Ø20 mm piston rod experiences increased bending moments under heavy lateral loads; utilizing an external guide rail prevents rod-bearing wear. As a double-acting cylinder, it relies on continuous air pressure to hold position—if air is lost or the valve centers, the load will drift. For strict position holding, consider a BSE rod lock variant. This model is dimensionally interchangeable per ISO 15552 for seamless retrofitting.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE50X332SN shares the exact ISO 15552 / VDMA 24562 mounting dimensions, making it a direct replacement for other ISO 15552 profile cylinders. It uses a PT1/4 port and features an extruded aluminum barrel without external tie rods, identical to the standard profile form factor.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.