verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X340S

The AirTAC SE50 Standard Cylinder SE50X340S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 340mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke340 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$104.18 $111.68Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X340S

The AirTAC SE50X340S is a double-acting, single-rod ISO 15552 profile cylinder with a 50 mm bore and 340 mm stroke. It generates 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa, making it well-suited for mid-range automation tasks. The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.

Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensors along the multiple grooves on its body. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration, softening hard impacts when cycling at speeds up to 800 mm/s.

Airtac SE50 Standard Cylinder SE50X340S Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X340S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke340 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X340S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×340Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X340S Is Used

package_2

Carton Flap Folding

Provides the 982 N push at 0.5 MPa needed to consistently fold heavy corrugated cardboard flaps on high-speed case packing lines.

conveyor_belt

Pallet Diverter Gate

Utilizes the 340 mm stroke to extend and reroute heavy pallets onto secondary conveyor tracks within distribution hubs.

precision_manufacturing

CNC Lathe Unloading

Pushes finished turned parts out of the chuck area, using the built-in magnet to trigger a DMSE sensor for robotic pickup.

Is the Airtac SE50 Standard Cylinder SE50X340S the Right Cylinder?

If 982 N of push at 0.5 MPa is too much for your payload, step down to the 40 mm bore, which provides 628 N. If your application requires heavier thrust, the 63 mm bore offers 1559 N. Keep in mind that a plain SE cylinder does not hold a load if air pressure is lost; for fail-safe holding, consider the BSE rod-lock variant.

At 340 mm of stroke, the 20 mm diameter rod and its bearing are subject to bending under lateral loads. To prevent premature seal wear and binding, guide the load externally rather than relying solely on the rod. For ISO 15552 retrofits, match the 50 mm bore, 340 mm stroke, PT1/4 port, and your required mounting accessory.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X340S FAQ

This 50 mm bore cylinder provides 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. Its operational speed ranges from 30 to 800 mm/s.

Yes, the SE50X340S is dimensionally interchangeable per ISO 15552 standards. It shares the same mounting footprint, 50 mm bore, 340 mm stroke, and PT1/4 port size, allowing for a direct replacement.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X340S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X340S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.