
The AirTAC SE50 Standard Cylinder SE50X350S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 350mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X350S is a double-acting single-rod ISO 15552 profile cylinder engineered for mid-range linear motion. Operating at 0.5 MPa, it generates 982 N of push force and 825 N of pull force, making it well-suited for moderate load manipulation. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This 50 mm bore unit features a 350 mm stroke and includes a built-in magnet (-S) for position sensing. The sensor grooves on three sides of the body accept AirTAC CMSE reed or DMSE electronic switches, allowing flexible mounting anywhere along the travel path. Furthermore, the field-adjustable pneumatic cushioning at both ends can be tuned via a set screw to soften end-of-stroke impacts, ensuring smooth deceleration of moving loads.
| Model | Airtac SE50 Standard Cylinder SE50X350S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing flap on a packaging conveyor, utilizing the 350 mm stroke and 982 N push force to redirect heavy cardboard boxes at high cycling speeds.
Extends to grip and stabilize stretch film rolls on automated wrapping machinery, relying on the precise position feedback from the built-in magnet and DMSE sensors.
Pushes processed test tubes out of a centrifuge carousel, where tuning the adjustable end cushions prevents fragile glass from cracking during rapid ejection.
Selecting this 50 mm bore involves sizing against its neighbors: stepping down to a 40 mm bore reduces the 0.5 MPa push force to 628 N, while stepping up to a 63 mm bore increases it to 1559 N. At 350 mm of stroke, the unsupported piston rod (Ø20 mm with an M16x1.5 thread) is subject to bending moments under side loads, so utilizing an external guide rail is recommended to prevent premature bearing wear. Because the SE50X350S is dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 cylinders, matching the PT1/4 port and standard mounting accessories without machining changes. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure is lost, which requires a BSE rod lock variant.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X350S provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, matching standard mounting interfaces and PT1/4 ports for direct retrofitting. However, it cannot hold a load mid-stroke if air is lost; the adjustable cushion only decelerates the piston near the ends, so a BSE rod lock is needed for position holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.