
The AirTAC SE50 Standard Cylinder SE50X350STC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 350mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X350STC is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It delivers a push force of 982 N at 0.5 MPa and a pull force of 825 N, making it a solid choice for mid-range actuation. The extruded aluminum barrel design omits external tie rods, yielding a compact body that mounts flush against machine frames while resisting corrosion.
This configuration includes a built-in magnet for CMSE reed or DMSE electronic position sensing. Field-adjustable air cushioning at both ends allows you to tune the end-of-stroke deceleration, preventing hard impacts when cycling the 350 mm stroke at speeds up to 800 mm/s.
| Model | Airtac SE50 Standard Cylinder SE50X350STC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizes the 982 N push force and TC trunnion pivot to swing a sorting gate on a packaging conveyor, handling heavy cardboard pallets smoothly.
Maintains precise tension on a shrink-wrap film roll, using the 350 mm stroke to accommodate varying material diameters without stalling.
Opens and closes a heavy machine tool safety enclosure, relying on the DMSE electronic sensors to confirm door closure before the cycle starts.
If you need to step down from this 50 mm bore, the 40 mm version offers a 628 N push at 0.5 MPa. Stepping up to the 63 mm bore raises that push capacity to 1559 N. Because this model uses a TC centre trunnion mount, it handles pivoting loads effectively, though the 350 mm stroke requires an external guide to prevent rod-bearing bending under heavy side loads. The PT1/4 port and M16x1.5 rod thread are standard for this bore size.
Note that the adjustable air cushion only decelerates the piston near stroke end; it does not lock the rod. If your application must hold a vertical load without live air pressure, you must integrate an external pilot-operated check valve or switch to a BSE rod-lock cylinder. This unit is dimensionally interchangeable with other ISO 15552 cylinders, ensuring a seamless retrofit.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides a push force of 982 N and a pull force of 825 N. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE50X350STC is dimensionally interchangeable per ISO 15552. You can drop it in as a replacement for other ISO 15552 profile cylinders using the same TC mounting hardware, PT1/4 ports, and 350 mm stroke dimensions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.