
The AirTAC SE50 Standard Cylinder SE50X35S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 35mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X35S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa and a maximum of 200 kgf at 1.0 MPa. Its square extruded aluminum barrel completely eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while surviving harsh industrial environments.
Equipped with a built-in magnet (-S), this 50 mm bore unit seamlessly integrates AirTAC CMSE reed and DMSE electronic position sensors directly into its three-side sensor grooves. The field-adjustable pneumatic cushioning at both ends allows technicians to precisely tune end-of-stroke deceleration via a set screw, protecting tooling during rapid 30-800 mm/s actuation cycles.
| Model | Airtac SE50 Standard Cylinder SE50X35S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Secures aluminum castings during CNC machining operations, utilizing the 982 N push force to rigidly hold workpieces against high-speed spindle cutting forces.
Drives the mechanical arms that fold corrugated cardboard flaps on automated packaging lines, relying on the 35 mm stroke for rapid, short-travel sequences.
Actuates precision metering valves for fluid dispensing in laboratory automation, where the built-in -S magnet triggers DMSE sensors for exact volume dosing.
If your assembly requires less force, stepping down to the 40 mm bore drops the 0.5 MPa push output to 628 N. For heavier payloads, moving up to the 63 mm bore increases that 0.5 MPa push capacity to 1559 N. Because the 35 mm stroke is relatively short, rod-bearing bending is minimal, though any unsupported lateral load still warrants an external guide.
As a dimensionally interchangeable ISO 15552 cylinder, the SE50X35S serves as a direct replacement for competing profile cylinders. To match this exact configuration, specify the 50 mm bore, 35 mm stroke, PT1/4 port, basic mounting, and the -S magnet for sensor readiness. Note that a plain SE cylinder cannot hold a load if air pressure is lost; use a BSE rod lock for fail-safe positioning.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The 50 mm bore provides 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. The operational speed range spans 30-800 mm/s.
No, the adjustable air cushion only decelerates the piston near stroke end and does not function as a brake. If you need to hold a load without live air pressure, an AirTAC BSE rod lock or external pilot-operated check valve is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.