
The AirTAC SE50 Standard Cylinder SE50X362SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 362mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X362SN is a double-acting single-rod profile cylinder built to ISO 15552 standards, delivering a push force of 982 N at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact body that mounts flush and resists corrosion. This 362 mm stroke is a non-standard made-to-order length, tailored for specific machinery envelopes.
This model includes a built-in magnet for CMSE and DMSE position sensing, alongside an NBR seal suited for standard pneumatic duties. Field-adjustable air cushioning at both ends allows you to tune end-of-stroke deceleration, softening hard impacts when cycling at speed.
| Model | Airtac SE50 Standard Cylinder SE50X362SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 362 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×362 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives diverting arms on high-speed parcel sorters where 982 N push and a 362 mm stroke reliably redirect packages between conveyor lanes.
Folds and squares corrugated cardboard blanks during automated box forming, using the 362 mm travel to clear the machine frame during retraction.
Actuates the beating-up mechanism in weaving machinery, utilizing the NBR seal and adjustable cushioning to absorb rapid reversals.
Delivering 982 N push at 0.5 MPa, this 50 mm bore fits between the 40 mm (628 N push) and 63 mm (1559 N push) options if you need to scale force up or down. Because the 362 mm stroke exceeds the 50 mm bore's 1200 mm standard maximum, it is manufactured as a non-standard made-to-order unit. With 362 mm of travel, the Ø20 mm rod and bearing face bending stresses under side loads; always use an external guide to prevent premature seal wear.
This cylinder is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders. It uses a PT1/4 port, features an NBR seal, and includes the -S magnet for CMSE or DMSE sensors. Note that the adjustable air cushion only decelerates the piston near stroke end; it is not a lock, so a BSE rod lock is required to hold a load safely without live air pressure.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa it provides 982 N push and 825 N pull. At 0.7 MPa the push is 1374 N, and the maximum rated push is 200 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston at stroke end and is not a locking mechanism. If you need to hold a load without continuous air pressure, you must use a BSE rod lock cylinder or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.