verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X370S

The AirTAC SE50 Standard Cylinder SE50X370S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 370mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke370 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$110.49 $117.99Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X370S

The AirTAC SE50X370S is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features a 50 mm bore and a 370 mm stroke, generating 982 N of push force and 825 N of pull force at 0.5 MPa. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.

Equipped with a built-in magnet (S option), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycling.

Airtac SE50 Standard Cylinder SE50X370S Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X370S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke370 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X370S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×370Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X370S Is Used

conveyor_belt

Packaging Line Diverter

Uses the 370 mm stroke to push cartons between adjacent conveyor lanes, relying on the 982 N thrust to overcome friction without stalling.

precision_manufacturing

CNC Lathe Door Actuator

Cycles the safety enclosure at high speed, using the adjustable cushion to soften the end stops and the -S magnet to confirm door closure for the interlock.

warehouse

Palletizing Stop Gate

Deploys a physical stop to halt pallets at a wrapping station, absorbing kinetic energy through the tuned end cushions before the load settles.

Is the Airtac SE50 Standard Cylinder SE50X370S the Right Cylinder?

When sizing this 50 mm bore actuator, compare its 982 N push force at 0.5 MPa against your actual load. If you need less force and a smaller footprint, step down to the 40 mm bore offering 628 N of push. If your application demands more thrust, step up to the 63 mm bore providing 1559 N. Because this model carries a 370 mm stroke, the unsupported piston rod is subject to bending under lateral loads; always use an external guide rail to prevent rod-bearing wear.

As a true ISO 15552 profile cylinder, the SE50X370S is dimensionally interchangeable with other ISO 15552 cylinders for direct retrofits. It uses a PT1/4 port and accepts standard ISO mounting accessories. Note that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure drops. For position holding, consider a BSE rod lock variant.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X370S FAQ

At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.7 MPa, the push force increases to 1374 N. The maximum push force is 200 kgf when operated at the 1.0 MPa pressure limit.

Yes. The SE50X370S shares the exact ISO 15552 / VDMA 24562 mounting dimensions, allowing it to drop into existing footprints. It uses a PT1/4 port and standard mounting hardware without requiring custom brackets.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X370S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X370S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.