
The AirTAC SE50 Standard Cylinder SE50X375S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 375mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X375S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics from washdown debris.
Equipped with a built-in magnet (-S), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-cap deceleration, softening hard mechanical stops during high-velocity 375 mm excursions.
| Model | Airtac SE50 Standard Cylinder SE50X375S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding arms on continuous-motion carton erectors, utilizing the 982 N push force to reliably snap heavy corrugated cardboard flaps into position before sealing.
Actuates a pneumatic routing gate on a 30-800 mm/s conveyor line, shifting warehouse pallets between merging lanes with smooth, adjustable end-cushioning.
Strokes 375 mm to extract and fill test tube racks in automated clinical analyzers, tracking full extension via DMSE solid-state sensors for cycle counting.
Generating 982 N push at 0.5 MPa, this 50 mm bore fits medium-duty positioning. If your assembly requires less force, the 40 mm bore yields 628 N push; for heavier payloads, the 63 mm bore provides 1559 N push. Because the stroke is 375 mm, the 20 mm rod and front bearing face bending loads under lateral stress, making an external guide rail advisable to prevent premature wear.
The integrated -S magnet enables direct position sensing using CMSE or DMSE switches. As a dimensionally standardized ISO 15552 cylinder, it serves as a direct retrofit for other profile cylinders sharing the PT1/4 port, 50 mm bore, and 375 mm stroke, utilizing existing mounting brackets without hardware modification.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X375S generates 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum operating pressure is 1.0 MPa, which yields a maximum push force of 200 kgf.
No, the SE50X375S is a standard double-acting cylinder and cannot hold a load if air pressure is lost. The adjustable air cushioning only decelerates the piston near the stroke ends; it does not act as a brake. For fail-safe load holding, consider the BSE series with a rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.