
The AirTAC SE50 Standard Cylinder SE50X380 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 380mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X380 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa. Its extruded aluminum barrel features a square design without external tie rods, yielding a compact, corrosion-resistant footprint that mounts flush against machine frames while eliminating protruding hardware that can catch debris.
This 50 mm bore unit incorporates field-adjustable air cushioning at both stroke ends, allowing technicians to dial in end-of-stroke deceleration and prevent hard mechanical impacts during high-speed cycling. As this specific SKU lacks the -S magnet option, it does not support CMSE or DMSE electronic position sensing without modification.
| Model | Airtac SE50 Standard Cylinder SE50X380 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 380 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×380 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push force required to sharply fold heavy corrugated cardboard flaps during high-speed packaging line operations over its 380 mm stroke.
Extends 380 mm to push heavy wooden pallets off a transfer line, utilizing the 30 mm adjustable cushion to soften the abrupt end stops during fast cycling.
Acts as a precise 380 mm stroke gauge stop for sheet metal feeding, where the clean profile barrel allows flush mounting to the press bed without tie-rod interference.
Stepping down to a 40 mm bore reduces the 0.5 MPa push output to 628 N, whereas moving up to a 63 mm bore increases it to 1559 N, giving you clear scaling options around this 982 N model. Because the 380 mm stroke exceeds the 300 mm threshold, the unsupported piston rod is susceptible to bending under lateral loads; pair this cylinder with an external linear guide to preserve bearing life. Remember that a standard SE cylinder relies on live air pressure to hold its position, and the adjustable cushion only decelerates the piston near stroke end rather than locking the load. If unpowered holding is required, explore the BSE rod-lock variant. As a true ISO 15552 profile cylinder, it serves as a dimensionally interchangeable direct replacement for other standardized VDMA 24562 actuators.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X380 generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes, the SE50X380 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing mounts using the standard PT1/4 port and M16x1.5 rod thread, though you must verify overall length compatibility.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.