
The AirTAC SE50 Standard Cylinder SE50X384S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 384mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X384S is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features a 50 mm bore and a 384 mm stroke, generating 982 N of push force at 0.5 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact body that mounts flush against machine frames while resisting corrosion.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. Field-adjustable air cushions at both ends allow you to tune the deceleration of the piston, softening hard impacts when cycling at high speeds across the extended 384 mm travel.
| Model | Airtac SE50 Standard Cylinder SE50X384S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 384 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×384 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing gate on a packaging conveyor, using the 982 N push force to smoothly pivot heavy loaded pallets without hesitation.
Drives the mechanical folder arms on a corrugated box sealer, relying on the 384 mm stroke to clear tall carton profiles during retraction.
Pushes a sample tray carriage into a testing station, using the -S magnet with DMSE electronic sensors to confirm exact placement.
This 50 mm bore provides 982 N push at 0.5 MPa. If your application requires less force, stepping down to the 40 mm bore yields 628 N of push; if you need more power, the 63 mm bore offers 1559 N. Because this is a 384 mm stroke, the 20 mm rod and its bearing face increased bending moments under side loads—always use an external guide to prevent premature seal wear. As a true ISO 15552 profile cylinder, it serves as a direct replacement for other 50 mm bore, 384 mm stroke cylinders with PT1/4 ports and standard mounting accessories. Note that a plain SE cylinder drifts if air pressure is lost; use a BSE rod lock for strict position holding.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes. The SE50X384S is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint, PT1/4 port size, and 50 mm bore dimensions as other standard profile cylinders. It is a direct replacement for any ISO 15552 cylinder of the same bore and stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.