
The AirTAC SE50 Standard Cylinder SE50X390S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 390mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X390S is a double-acting single-rod profile cylinder built to the ISO 15552 standard. Delivering a robust 982 N push force at 0.5 MPa, it utilizes a square extruded aluminum barrel that eliminates external tie rods. This clean-profile design resists corrosion and allows for flush mounting on compact machinery.
Equipped with a built-in magnet (the S option), this unit supports AirTAC CMSE reed and DMSE electronic position sensors along the three integrated sensor grooves. The field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration, softening hard impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE50 Standard Cylinder SE50X390S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 390 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×390 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing flap on a packaging conveyor, using the 982 N push force to smoothly redirect heavy cardboard cartons without stalling.
Maintains precise downward pressure on a shrink-wrap film roll, utilizing the 390 mm stroke to accommodate varying roll diameters as material depletes.
Opens and closes a vertical machining center safety guard, relying on the built-in magnet and DMSE sensor to confirm door closure before the cycle starts.
Selecting the SE50X390S places you in a versatile mid-range force class. If 982 N of push at 0.5 MPa is excessive for your payload, stepping down to the 40 mm bore drops the output to 628 N. Conversely, if you need more authority, the 63 mm bore raises the push force to 1559 N. Because this cylinder uses a standard PT1/4 port and an M16x1.5 rod thread, it serves as a direct, direct dimensional replacement for any ISO 15552 cylinder with the same mounting interface.
With a 390 mm stroke, the unsupported rod length increases the risk of side-load bending on the front bearing. For optimal longevity, pair this cylinder with an external guide rail to absorb lateral stresses and prevent rod binding. Note that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking mechanism, so a BSE rod lock is required if the load must be held vertically during a loss of air pressure.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.7 MPa, the push force increases to 1374 N. The maximum push force is 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X390S is dimensionally interchangeable with any standard ISO 15552 profile cylinder. You can reuse your existing mounting hardware and PT1/4 pneumatic fittings. The built-in magnet also allows you to mount standard AirTAC CMSE or DMSE sensors directly into the barrel grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.