
The AirTAC SE50 Standard Cylinder SE50X400 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 400mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X400 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 400 mm stroke. It features a robust Ø20 mm piston rod with an M16x1.5 thread, delivering 982 N of push force and 825 N of pull force at 0.5 MPa. The extruded aluminum square barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
Field-adjustable pneumatic cushioning at both ends allows precise tuning of end-of-stroke deceleration, absorbing kinetic energy to prevent hard mechanical impacts during rapid 30-800 mm/s traversal. This specific SKU is configured without a built-in magnet, meaning it does not support direct CMSE or DMSE position sensing out of the box. For operations requiring mid-stroke or end-stroke electronic confirmation, an alternative SKU with the -S magnet option would be required.
| Model | Airtac SE50 Standard Cylinder SE50X400 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives a 400 mm stroke folding arm on a case erector, utilizing the 982 N push force at 0.5 MPa to cleanly tuck heavy cardboard flaps before tape application.
Transfers heavy wooden pallets laterally between adjacent roller conveyors, relying on the field-adjustable air cushion to soften the 400 mm extension stop.
Extracts molded plastic parts from a press, using the 825 N retract force at 0.5 MPa to pull the part clear of the mold cavity over the long 400 mm travel.
At 0.5 MPa, this 50 mm bore generates 982 N of push force. If your application requires less force, stepping down to the 40 mm bore yields 628 N of push, whereas stepping up to the 63 mm bore provides 1559 N of push for heavier loads. Because this is a plain double-acting cylinder, it will not hold a load if air pressure drops or the valve is centered; a BSE rod lock variant or external pilot-operated check valve is necessary for fail-safe position holding.
With a 400 mm stroke, the unsupported rod length increases the risk of side-load bending and bearing wear. An external guide rail is strongly recommended to prevent cantilevered loads from damaging the rod bearing. As a true ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders, matching the exact 50 mm bore, 400 mm stroke, PT1/4 port, and standardized mounting accessory footprint without requiring custom brackets.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X400 operates at 0.15-1.0 MPa. At 0.5 MPa, it provides 982 N push and 825 N pull force. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa.
Yes, the SE50X400 is dimensionally interchangeable per the ISO 15552 standard. It shares the exact mounting interface, PT1/4 port, and 50 mm bore dimensions of other ISO 15552 profile cylinders, allowing a seamless direct retrofit without custom hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.