
The AirTAC SE50 Standard Cylinder SE50X400H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 400mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X400H is a double-acting single-rod ISO 15552 profile cylinder engineered for high-temperature actuation. It generates 982 N of push force and 825 N of pull force at 0.5 MPa, utilizing a 50 mm bore and a 400 mm stroke. Equipped with a Viton (FKM) seal, this unit reliably operates in ambient temperatures up to 150 C, making it highly suitable for heated manufacturing environments.
The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant profile that mounts flush in tight machinery spaces. Instead of fixed rubber bumpers, field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, effectively softening hard impacts at high cycling speeds. Note that this specific SKU lacks a built-in magnet, meaning it is not wired for CMSE or DMSE position sensing without modification.
| Model | Airtac SE50 Standard Cylinder SE50X400H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizes the 982 N push force at 0.5 MPa to eject hot plastic parts from molds, leveraging the FKM seal to withstand ambient radiant heat up to 150 C.
Actuates diverter arms on a conveyor transporting freshly annealed metal components, where the high-temperature Viton seal resists thermal degradation.
Drives the sealing jaw assembly on shrink-wrap packaging lines, accommodating the 400 mm stroke while surviving proximity to heat tunnels.
When sizing this 50 mm bore actuator, consider stepping down to a 40 mm cylinder if your load requires less than 628 N of push force at 0.5 MPa, or moving up to a 63 mm bore if you need the 1559 N thrust bracket. Because the 400 mm stroke creates a long unsupported rod extension, applying lateral load will induce severe bending stress on the rod bearing; always pair this length with an external linear guide to prevent premature seal wear. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for any matching 50 mm bore, 400 mm stroke ISO 15552 unit, utilizing the standard PT1/4 port and standard mounting accessories. Remember that the adjustable air cushion only decelerates the piston near the stroke end and does not hold the load; if air pressure drops, the rod will drift, requiring a separate BSE rod lock for fail-safe positioning.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50 mm bore cylinder provides a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force reaches 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X400H is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint, PT1/4 port size, and 400 mm stroke length of other profile cylinders. It serves as a direct replacement, though you should note this specific SKU lacks a position sensor magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.