
The AirTAC SE50 Standard Cylinder SE50X400SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 400mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X400SH is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding thermal environments. Delivering a robust 982 N push force at 0.5 MPa, it features a 50 mm bore and a 400 mm stroke. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting debris buildup.
Equipped with high-temperature FKM (Viton) seals, this unit reliably operates from -20 to 150 C. The integrated -S magnet enables seamless position tracking with AirTAC CMSE reed and DMSE electronic sensors. Field-adjustable pneumatic cushioning at both stroke ends allows precise deceleration tuning to absorb kinetic energy, protecting payloads from harsh mechanical impacts.
| Model | Airtac SE50 Standard Cylinder SE50X400SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Withstands 150 C oven heat via FKM seals while executing 400 mm strokes to position film rolls, driven by 982 N push force at 0.5 MPa.
Halts heavy pallets at 0.7 MPa using 1374 N of thrust, relying on the extruded tie-rod-free profile to resist washdown debris in transfer lines.
Deploys the M16x1.5 rod end to push molded parts clear of hot tooling, utilizing CMSE reed sensors to confirm full 400 mm extension.
This 50 mm bore generates 982 N of push at 0.5 MPa. If your machinery requires less force, the 40 mm neighbor provides 628 N; if you need greater thrust, the 63 mm option steps up to 1559 N. Because the 400 mm stroke creates extended leverage, long unsupported loads induce bending moments on the rod bearing—always pair this cylinder with an external guide rail to prevent premature wear. As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement for competing profile cylinders, utilizing the standard PT1/4 port and shared mounting accessories. Note that the adjustable end cushions only decelerate the piston near stroke end; they do not hold a load if air pressure drops, so add a BSE rod lock for fail-safe holding.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X400SH delivers 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force reaches 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards, acting as a direct replacement for other profile cylinders using the same mounting hardware. The H seal designation means it uses FKM (Viton) elastomers, expanding the operating temperature range up to 150 C for high-heat applications.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.