
The AirTAC SE50 Standard Cylinder SE50X400SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 400mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X400SN is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa over a 400 mm stroke. Its extruded aluminum square barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies mounting and reduces machine footprint.
This specific configuration includes a built-in position-sensing magnet for CMSE reed or DMSE electronic switches, paired with NBR seals for reliable pneumatic operation. The field-adjustable air cushioning at both end caps allows technicians to tune deceleration, softening hard mechanical stops during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X400SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the mechanical arms on packaging lines to fold corrugated carton flaps, utilizing the 400 mm stroke to clear varying box widths before the sealing head.
Pushes staged goods onto a waiting pallet at logistics hubs, applying 982 N of extend force to slide heavy cartons smoothly into stretch-wrap stations.
Actuates the safety sliding door on CNC lathes, using the integrated magnet to trigger DMSE electronic sensors that confirm the enclosure is locked before machining begins.
When sizing this 50 mm bore, stepping down to a 40 mm cylinder reduces the 0.5 MPa push to 628 N, while stepping up to a 63 mm bore increases it to 1559 N. Because this model features a 400 mm stroke, the unsupported piston rod is subject to bending under lateral loads; utilizing an external guide rail prevents side-load wear on the rod-bearing surface.
As a true ISO 15552 profile cylinder, it provides direct dimensional interchangeability with other ISO 15552 units, simplifying retrofits. Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve centers; if the application must hold a vertical load statically without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides a 982 N push and an 825 N pull force. At 0.7 MPa, the push force is 1374 N, with an absolute maximum push of 200 kgf at 1.0 MPa. The air supply port is PT1/4.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke limits and does not act as a braking mechanism. If a load must be held without live air pressure, a separate rod lock cylinder or external pilot-operated check valve is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.