
The AirTAC SE50 Standard Cylinder SE50X400STC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 400mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X400STC is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa. Driven by filtered air over a 0.15-1.0 MPa operating range, it utilizes a PT1/4 port and a 20 mm hard-chrome plated rod to power demanding linear motion tasks.
Built with a square extruded aluminum barrel that eliminates external tie rods, this design offers a compact, corrosion-resistant footprint that mounts flush within tight machine envelopes. The integrated -S magnet enables precise end-of-stroke detection using AirTAC CMSE reed or DMSE electronic sensors, while the field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-stop deceleration for a 400 mm stroke, effectively minimizing mechanical shock at high transit speeds.
| Model | Airtac SE50 Standard Cylinder SE50X400STC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push and 400 mm reach required to open and fold corrugated cardboard carton blanks in continuous packaging lines.
Utilizes the TC trunnion mount to pivot diverter arms smoothly across a conveyor belt, repositioning heavy pallets laterally.
Leverages the built-in magnet with DMSE electronic sensors to trigger precise 400 mm linear indexing of automated clinical sample racks.
Delivering 982 N push at 0.5 MPa, this 50 mm bore sits neatly between the 40 mm bore (628 N) and the 63 mm bore (1559 N), allowing you to step down for lighter loads or scale up if your application demands greater thrust. Because the TC center trunnion mount handles pivoting loads, ensure the pivot axis is perfectly aligned to prevent rod bearing side-load wear. For this 400 mm stroke, an external guide rail is strongly recommended to support the piston rod against bending and prevent premature seal failure under heavy lateral loads. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for any standard ISO 15552 cylinder, sharing standardized mounting hardware. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If air pressure drops, the cylinder drifts, requiring a BSE rod lock for fail-safe holding.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50 mm bore cylinder generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and reaches a maximum push force of 200 kgf at 1.0 MPa.
No. The field-adjustable air cushion at both ends only decelerates the piston near the stroke limits; it is not a locking mechanism. If air is lost or the valve is centered, the cylinder will drift. For fail-safe load holding, you need a BSE series rod lock or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.