
The AirTAC SE50 Standard Cylinder SE50X40S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 40mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X40S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact, high-cycle tasks. Delivering 982 N of push force at 0.5 MPa across a 40 mm stroke, it relies on a hard-chrome plated Ø20 mm rod to resist deflection during rapid traverses. Its square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies bracket mounting in tight machine cells.
Because this unit includes the -S magnet code, it is fully primed for AirTAC CMSE reed and DMSE electronic position sensing. The field-adjustable pneumatic cushioning at both end caps can be dialed in via set screws to soften mechanical impacts at stroke endpoints, ensuring smooth deceleration rather than harsh, fixed-bumper stops.
| Model | Airtac SE50 Standard Cylinder SE50X40S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Secures printed circuit board panels against a router bed with 982 N of force, using the short 40 mm stroke to cycle rapidly without consuming valuable vertical machine envelope.
Drives a mechanical flap-folding arm on a packaging line, relying on the -S magnet and DMSE sensors to verify arm retraction before the sealing head advances.
Actuates a lightweight diverter gate on a bottle conveyor, utilizing the adjustable end cushions to prevent hard slamming that could crack glass containers at high cycle rates.
Selecting the SE50X40S is ideal when you need 982 N push (825 N pull) at 0.5 MPa within a short 40 mm travel. If your payload is lighter, stepping down to the 40 mm bore drops the 0.5 MPa push to 628 N, whereas upgrading to the 63 mm bore raises it to 1559 N for heavier clamping. This model’s PT1/4 porting and standardized ISO 15552 mounting dimensions make it a direct replacement for equivalent profile cylinders, utilizing standard FA front flanges or LB foot mounts.
The integrated -S magnet enables precise end-of-stroke detection using CMSE or DMSE switches seated in the body’s sensor grooves. Remember that the adjustable air cushion only decelerates the piston near the stroke ends; it does not lock the rod. If your fixture must hold a load safely during a sudden air loss, pair this cylinder with a BSE rod-lock variant or an external pilot-operated check valve.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X40S provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The cylinder operates at speeds ranging from 30 to 800 mm/s.
Yes. The SE50X40S is a true ISO 15552 profile cylinder, meaning its mounting and rod-end dimensions are standardized for direct dimensional interchangeability. You can drop it into existing ISO 15552 tooling using standard mounting accessories, provided your application uses the default PT1/4 port thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.