
The AirTAC SE50 Standard Cylinder SE50X410S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 410mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X410S is a double-acting, single-rod ISO 15552 profile cylinder featuring a 50 mm bore and 410 mm stroke. It delivers a push force of 982 N at 0.5 MPa and a pull force of 825 N, operating at speeds from 30-800 mm/s. The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensors without requiring external modification. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to fine-tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X410S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 410 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×410 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding and sealing arms on automated case erectors, utilizing the 982 N push force and 410 mm stroke to erect large corrugated cartons smoothly.
Acts as a diverter or stopping gate on roller conveyors, where the built-in magnet provides precise DMSE sensor feedback for indexing pallets.
Extends and retracts tooling magazines in CNC machining centers, relying on the adjustable end cushions to protect precision spindles from shock during rapid 30-800 mm/s cycling.
Generating 982 N of push at 0.5 MPa, this 50 mm bore fits medium-duty positioning tasks. If your application requires less force, stepping down to the 40 mm bore yields 628 N of push, conserving space. For heavier loads, stepping up to the 63 mm bore provides 1559 N of thrust. Because the 410 mm stroke exceeds 300 mm, the unsupported piston rod is prone to bending under lateral stress; integrating an external guide rail is strongly recommended to prevent premature rod-bearing wear.
As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement for other standard profile cylinders, matching the 50 mm bore, 410 mm stroke, PT1/4 port, and standard mounting accessories. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not lock the load. If the assembly must hold position without live air pressure, a BSE rod lock or external pilot-operated check valve is required.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X410S generates 982 N of push force and 825 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 1374 N. The maximum operating pressure is 1.0 MPa, which yields a maximum push force of 200 kgf.
Yes, the SE50X410S is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, matching the 50 mm bore, 410 mm stroke, PT1/4 port, and standard mounting dimensions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.