
The AirTAC SE50 Standard Cylinder SE50X420 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 420mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X420 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa (1374 N at 0.7 MPa) over a 420 mm stroke. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine frames.
This unit lacks the -S magnet option, meaning it operates without built-in position sensing out of the box. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a setscrew, softening hard mechanical stops during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X420 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 420 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×420 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates diverter arms on packaging lines, utilizing the 982 N push at 0.5 MPa to reliably redirect heavy cardboard cartons along a 420 mm travel path.
Drives a 420 mm linear displacement stage for automated material tensile testing, relying on the extruded profile body for rigid, flush mounting to the test rig.
Pushes empty pallets out of a stacking well, using the full 420 mm stroke to clear the pallet footprint before the next unit drops into place.
When sizing this 50 mm bore actuator, compare its 982 N push at 0.5 MPa against the adjacent bores: stepping down to a 40 mm bore yields 628 N, while stepping up to a 63 mm bore provides 1559 N. As a standard ISO 15552 profile cylinder, it serves as a direct retrofit for any matching 50 mm bore, 420 mm stroke, PT1/4 port footprint, requiring no custom mounting brackets.
Because the 420 mm stroke creates a long unsupported rod span, the Ø20 mm piston rod is susceptible to bending under lateral loads; an external guide rail should be installed to prevent side-load damage to the rod-bearing. Note that this plain SE cylinder will drift if air pressure is lost or the valve is centered—it cannot hold a load without live pressure.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X420 generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
No, the SE50X420 is a standard double-acting cylinder and will drift if air is lost or the valve is centered. Its field-adjustable air cushion only decelerates the piston near stroke end and does not function as a locking brake. For position holding, consider a BSE rod lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.