
The AirTAC SE50 Standard Cylinder SE50X435S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 435mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X435S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force and 825 N of pull force at 0.5 MPa. Because this is a 435 mm stroke, it is manufactured as a non-standard made-to-order length, pushing beyond the standard 400 mm catalog range while retaining the 30 mm adjustable cushioning at both ends.
The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush on machinery. Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensing for precise mid-stroke tracking.
| Model | Airtac SE50 Standard Cylinder SE50X435S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 435 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×435 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 435 mm stroke to push heavy pallets between adjacent roller conveyors, relying on the 982 N push force to overcome rolling friction.
Deploys the 50 mm bore to fold carton blanks, where the built-in magnet triggers a DMSE electronic sensor to confirm the folding arm is fully retracted.
Actuates a 435 mm travel arm to move test tube racks into a centrifuge loading bay, benefiting from the compact tie-rod-free profile to fit tight enclosures.
When sizing this 50 mm bore, you can step down to the 40 mm bore for lighter loads (628 N push at 0.5 MPa) or step up to the 63 mm bore for heavier tasks (1559 N push at 0.5 MPa). This model uses a PT1/4 port and a 20 mm rod with an M16x1.5 thread. Because the 435 mm stroke exceeds standard lengths, verify your overall envelope dimensions. At this stroke length, the unsupported piston rod is susceptible to bending under side loads; integrating an external guide rail prevents rod-bearing wear.
If your process requires the load to mechanically hold its position during a loss of air pressure, note that this standard SE cylinder will drift. The adjustable end cushions only decelerate the piston near stroke limits rather than locking it. For strict holding requirements, evaluate the AirTAC BSE series with a rod lock.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The 50 mm bore yields 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It uses a PT1/4 port and operates at speeds from 30 to 800 mm/s.
Yes, the SE50X435S adheres to ISO 15552 / VDMA 24562 mounting dimensions, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders without altering your mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.