
The AirTAC SE50 Standard Cylinder SE50X450 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 450mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X450 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 982 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This clean profile simplifies retrofitting into tight spaces without protruding hardware.
This 50 mm bore, 450 mm stroke unit features field-adjustable pneumatic cushioning at both ends to decelerate the piston smoothly before the end caps. Because this specific SKU lacks the S magnet suffix, it is not equipped for CMSE or DMSE position sensing out of the box. It operates reliably at speeds from 30-800 mm/s using a PT1/4 port and a 20 mm hard-chrome rod.
| Model | Airtac SE50 Standard Cylinder SE50X450 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives a 450 mm arm to fold corrugated cardboard flaps on a packaging line, utilizing the 982 N push force to cleanly crease heavy materials at speed.
Extends across a roller conveyor to redirect pallets down a side lane, relying on the ISO 15552 profile body for flush mounting between machinery.
Raises populated printed circuit boards within a magazine loader, where the adjustable end cushions prevent jarring impacts that could dislodge delicate components.
Selecting this 50 mm bore makes sense when you need 982 N of push at 0.5 MPa. If your application is lighter, the 40 mm neighbor provides 628 N, whereas stepping up to the 63 mm bore yields 1559 N. This SE50X450 is dimensionally interchangeable with other ISO 15552 cylinders, meaning you can reuse existing mounting accessories like FA front flanges or LB foot brackets without machining new plates.
Because this model has a 450 mm stroke, the unsupported rod overhang increases side-load risk; an external guide rail is recommended to prevent rod-bearing bending. Note that a plain SE cylinder drifts when air is lost or the valve centers—the adjustable cushion only softens the end-of-stroke impact and does not lock the load. For position holding, consider a BSE rod lock variant.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes. The SE50X450 shares the standardized ISO 15552 / VDMA 24562 mounting interface, allowing it to serve as a direct dimensional replacement for other ISO 15552 profile cylinders. You can retain your existing mounting hardware and PT1/4 port connections.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.